Publicidad
Idiomas disponibles
Idiomas disponibles
a. Check current at power outlet by plugging in
another appliance.
b. Plug and unplug to check whether the charger
is ok
c. Check whether the battery has been damaged
d. Move the charger and battery pack to a
location where the surrounding air temperature
is approximately
e. If the charging problem persists, take the tool,
battery pack and charger to an authorized
service center.
f. Under certain conditions, when the charger is
plugged into the power supply, the exposed
charging contacts inside the charger can be
shorted by foreign material. Foreign materials
of a conductive nature such as metallic
particles should be kept away from charger
cavities. Always unplug the charger from the
power supply when there is no battery pack in
the charger or before attempting to clean.
TO REMOVE OR INSTALL BATTERY PACK
Depress the Battery Pack Release Button to
remove the Battery Pack from your tool. After
recharging, insert the battery pack into the battery
port. A simple push and slight pressure will be
sufficient.
6
PROBLEM SOLUTION
EN
I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
a) Check if the charger and the battery pack are
specifically designed for working together.
b) The battery can be inserted into the charger only
in one direction. Turn the battery around until it can
be inserted into the slot, the indicator light should
be green and flash when the battery is charging.
REASONS FOR DIFFERENT CHARGING TIMES
The charging time can be affected by many
reasons which are not defects in your product.
a) If the battery pack is only partly discharged it
may be re-charged fully in 1 hour.
b) If the battery pack and ambient temperature
are very cold/ hot, it may take longer (1-2
hours) to re-charge. Please find an appropriate
environment with proper air temperature to
start charging.
c) If the battery pack is very hot, remove battery
pack from the charger and allow battery pack
to cool first to ambient temperature and then
recharging can be started.
.
65 and 75
F (18-24
C)
0
0
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your battery charger requires no additional
lubrication or maintenance. Never use water or
chemical cleaners to clean your charger. Wipe
clean with a dry cloth. Always store your charger in
a dry place.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
FCC PART 15
SUPPLIER'S DECLARATION
OF CONFORMITY
Product Description : Kress Battery Charger
Model Number : KAC02
Trade Name : Kress
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Responsible Party :
Positec USA, Inc.
10130 Perimeter Parkway, Charlotte, NC 28216
USA
Tel.: (704) 599-3711
Fax: (704) 599-6390
Publicidad
