Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
Safety instructions
Caution!
Please read the manual carefully
to manage the fan safely, save the
manual for future use.
Warning!
1. If the power cord or plug is
damaged, have it replaced by
qualified personnel.
2. To protect against risk of
electric shock; do not immerse the
unit, cord or plug in water or other
liquid.
3. This device can be used by
children aged 8 years and above
and persons with disabilities or
lack of experience and knowledge
if they are kept under supervision
or given instruction concerning
use of the appliance in a safe
way and that they understand the
risks. Children should not play
with the appliance. Cleaning and
maintenance shall not be done by
children without supervision.
4. Unplug from main outlet when
not in use and before cleaning.
5. Keep electrical appliances out
of reach of children or persons
with disabilities. Do not let
them use the appliance without
supervision.
2
6. The fan may not be used
without the protective blade guard.
– Before cleaning the fan should
be disconnected from the mains.
– The protective blade guard must
not be disassembled / opened to
clean the fan blades.
– Clean the fan with a damp cloth.
(The fan must be disconnected
before cleaning)
7. Never insert fingers, pencils
or any other object through the
protective blade guard when fan
is running.
8. Disconnect fan when moving
from one place to another.
9. Be sure that the fan is on a
stable surface when you use it to
avoid tipping it over.
10. If the fan tips over during
operation, turn the unit off
and unplug it from the mains
immediately.
11. Do not use the fan in the
window, the rain can create an
electrical hazard.
12. Only for domestic use.
Product overview
3
1
8
10
4 13
2
5
6
12
7
11
9
Note: All images in this manual are for clarification
purposes. Discrepancies between the real object and
the picture on the drawing can occur.
1. Front protective guard
2. The rotor
3. Plastic Nut
4. Rear protective guard
5. Motor shaft
6. Oscillation button
7. Stand
8. Grid screw
9. The fan base
10. Grid nut
11. Speed buttons
12. Fan Motor
13. Grid handle
ENG
Features
When the installation is complete, connect to a
power outlet.
1. Fan speeds
0 = Off
1 = Low speed
2 = Medium speed
2. Starting Oscillation / movement
Press the oscillation button to start the movement.
Stop Oscillation / movement
Lift / pull up the oscillation button to stop
the movement.
3. Fan tilt
Adjust the tilt of the fan head to the desired angle by
gently loosening the knob on the fan's side. Adjust the
fan head up or down as desired and then secure
the knob.
Maintenance and cleaning
The fan requires little maintenance. If the fan has
been broken and requires service contact
qualified personnel.
1. The fan must be disconnected from the mains
before cleaning and assembly.
2. To ensure adequate air flow to the fan motor, keep
the vents on the back of the fan motor free of dust.
Note do not dissemble the fan to remove dust.
3. Wipe the exterior with a soft wet cloth and
mild detergent.
4. Do not use abrasive cleaners or solvents to prevent
scratching the surface.
Do not use any of the following as a cleaner: gasoline,
or thinning solvent.
5. Protect the motor housing and internal parts from
water and other liquids.
3
Publicidad
