Publicidad
Idiomas disponibles
Idiomas disponibles
Using your Dishwasher..continued
F. Dishware
Drying
At the end of the cycle the dishwasher will stop and a period of
condensation
drying will follow (more information
on
Condensation
Drying can be found in the Features,
Accessories,
and Options section of this manual.).
After 12 - 15
minutes of drying,
=
the LED display will show "0",
=
the "Sanitized"
indicator will light (except in the
Quick Wash and Rinse cycles).
G. Additional
Drying
Heat
With this option you can raise the temperature
of the rinse
water, which will result in better and faster drying.
a) Press and hold the left "Cancel Drain" button as shown in
Figure 27, then press and hold the On/Off button.
27
When the LED display shows a "0" or a "1", release both
buttons.
b) To enable the Additional
Drying Heat, press the left "Cancel
Drain" button until the LED display shows a "1".
c) To disable the Additional
Drying Heat, press the left "Cancel
Drain" button until the LED display
shows a "0".
d) Press the On/Off button. You may now wash dishes as
usual.
H. Unloading
the Dishwasher
1. General
Guidelines
.........
POSSIBLE
BURN INJURY:
Dishware
is hot
immediately
after
the wash
cycle.
Do not handle
dishware
immediately
after
the wash
cycle.
a) Unload the bottom rack first.
b) Unload the silverware
basket(s).
c) Unload the top rack.
d) If the Extra Tall Item Sprinkler was installed, return the
dishwasher
to its normal condition (see the Loading Extra
Tall Items instructions
in the "Loading the Dishwasher"
section of this manual).
Dishware Drying
Unloading
the Dishwasher
1 1
Publicidad
