Publicidad
Idiomas disponibles
Idiomas disponibles
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When
to replace
the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons (_ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button
while pressing SHIFT.
To use FUNCTION on the remote control
The FUNCTION substitutes forthe function buttons (TAPE DECK
1/2, TUNER, VIDEO/AUX, CD, MD) on the main unit.
Each time FUNCTION is pressed, the next function is selected
cyclically.When tapes are inserted in both decks, each deck is
selected with FUNCTION.
_11_/1_ PRESET on the remote control
The function is same as that of 41_ on the main unit.
SHIFT
FUNCTION
_ c3 _;3
,_, c3 c3
PRESET
• If the remote
control
is not going to be used for an extended
period
of time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
• The remote control
may not operate
correctly
when:
- The line of sight between
the remote control
and the remote
sensor
inside the display window
is exposed
to intense
light,
such as direct sunlight
- Other remote controls
are used nearby (those of a television,
etc.)
5 ENGLISH
TAPE
POWER
DEMO
CD
,,=====J
To turn
the power
on
Press one of the function
buttons (TAPE,
TUNER,
VIDEO/AUX,
CD, MD). Playback
of the inserted
disc or tape
begins,
or the
previously
tuned station
is received
(Direct
Play Function).
POWER
is also available.
When the unit is turned on, the disc compartment
may open and
close to reset the unit.
To turn the power off
Press POWER.
Flash
windows
The windows
on the top of the unit and the cassette
decks
light
up or flash while the unit is being powered
on.
To turn off the light of the top window,
press
•
while pressing
CD. To turn back on, repeat the above.
Game Demo
When the AC cord is connected, the display window demonstrates
the game Demo. When the power is turned on, the game Demo
is overridden by the operation display. When the power is turned
off, the game Demo is restored.
To cancel
the game
Demo
Press DEMO. To re-activate
the game
Demo,
press DEMO
again.
To play the the game
Demo
1 Press DEMO
so that the game Demo displays.
2
Press 41_.
Three numbers
on the display start to run.
3
Press •
once.
The number on the left side stops.
4
Press •
twice to stop the remaining
two numbers.
Scoring:
20 points are given to start the game.
If all the numbers
are equal, 50 points are added
to the score.
If not equal, one point is subtracted.
If the gained points reach 9999, you win.
If the gained points fall to 0, you lose.
To reset the game Demo
Press DEMO twice, then press _11_. The game starts again.
• During
playing
the game
Demo,
•
and
41_
are available
only for the game Demo. Cancel the game Demo to use these
buttons for the functions
such as CD playing,
etc.
• During
the game
Demo,
some
indicators
unrelated
with the
actual operation
light up on the display.
Publicidad
