Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO
RECEPTION
POWER--
m
2
i.
_oo
_o0
_J_
_ ..........
J
o
-MONO
TUNER
-BAND
-- SHIFT
1 Press TUNER
BAND repeatedly
to select the
desired band.
When
TUNER
BAND is pressed
while the power is off, the
power is turned
on directly.
To select a band with the remote control
Press BAND while pressing SHIFT.
2 Press _I
DOWN or _
UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, "TUNE" is displayed for 2 seconds.
During FM stereo reception, (l((_J)) is displayed.
(((®Jl)
TUNE
To search for a station quickly (Auto Search)
Keep _
DOWN or IH_ UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press _
DOWN or _
UP.
• The Auto Search may not stop at stations with very weak signals.
When
an FM stereo
broadcast
contains
noise
Press MONOTUNER
on the remote control while pressing SHIFT
so that "MONO" appears
on the display.
MONO
i ))}));
Noise is reduced, although reception is monaural.
To restore stereo reception, press these buttons so that "MONO"
disappears.
To change
the AM tuning
interval
The default setting
of the AM tuning
interval
is 10 kHz/step.
If
you use this unit in an area where the frequency
allocation
system
is 9 kHz/step,
change the tuning interval.
Press POWER
while pressing
TUNER
BAND.
To reset the interval,
repeat this procedure.
41_PRESET
==CLEAR
...................................................................
1 _Q
,'-',
1
MULTI
JOG
oc}C
Ooc
o_---
(_
r3
C
0
-0-9,+10
- BAND
- SHIFT
The unit can store a total of 32 preset stations. When a station
is
stored, a preset number is assigned to the station.
Use the preset
number to tune in to a preset station
directly.
1 Press TUNER BAND to select a band, and press
DOWN or _
UP to select a station.
2 Press
I | SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already
been stored.
1;
;
1{{;
PRESET
NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press BAND while pressing
SHIFT to select a
band.
2 Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number
15, press +10 and 5.
Selecting
a preset
number
on the main
unit
Press TUNER
BAND to select a band.Then,
press <liD,- PRESET
repeatedly
or turn MULTI JOG.
Each time <1_ PRESET
is pressed,
the next ascending
number
is selected.
To clear
a preset
station
Select the preset number of the station to be cleared. Then, press
[] CLEAR,
and press III SET within 4 seoonds.
The preset
numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
When the AM tuning
interval
is changed,
all preset stations
are
cleared.
The preset stations
have to be set again.
ENGLISH
8
_iiiii!Zliiiii
iiiii!_i}iiill
i, ii !i,i
!81i!_'
Z
0
m
;ii,W:i!+
!!iiii=!!iiii
+
'iiilO}iii_
<
n,
Publicidad
