Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
1.
Remove unit from carton and discard all packaging.
HOW TO SET UP YOUR UNIT
Location
of the Air Compressor
Locate
the air compressor
in a
clean, dry and well ventilated area.
The air compressor
should
be
located
at least 12" away from
the wall or other obstructions
that
will interfere with the flow of air.
The air compressor
pump
and
shroud are designed to allow for
proper
cooling.
The ventilation
openings
on the compressor
are
necessary
to maintain
proper
operating
temperature.
Do not
place rags or other containers on
or near these openings.
GROUNDINGINSTRUCTIONS
Risk of Electrical
Shock.
In the event
of a short circuit,
grounding
reduces
the risk of shock by
providing an escape wire for the
electric
current.
This air compres-
sor must be properly
grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following illustra-
tions).
1.
The cord set and plug with this
unit contains
a grounding
pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT:
The outlet
being used
must be installed
and grounded
in
accordance
with all local codes and
ordinances.
Make sure the outlet being used
has the same configuration as the
grounded plug. DO NOT USE AN
ADAPTER. See illustration.
Grounding
Pin
Grounded
Outlets
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
If these
grounding
instructions
are not completely
understood,
or if in doubt as to whether
the
compressor is properly grounded,
have the installation checked by a
qualified electrician.
Risk of Electrical
Shock. IMPROPER
GROUNDING CAN RESULT IN
ELECTRICAL
SHOCK.
Do not modify
the plug provided.
If
it does not fit the available
outlet,
a correct
outlet
should be installed
by a qualified
electrician.
Repairs to the cord set or plug
MUST be made by a qualified elec-
trician.
A16751
10- ENG
Publicidad
