I-"¥-*_J-'1 _N D_
WARNING:
Risk of Bursting
I_1
Air Tank: The following conditions
could lead to a weakening
of the tank, and result
in a violent tank explosion and could cause property damage or serious injury.
What Could Happen
How To Prevent It
Failure to properly drain condensed
Drain tank daily or after each use. If tank
water from tank, causing rust and
develops a leak, replace it immediately
thinning of the steel tank.
with a new tank or replace the entire
compressor.
Modifications
or attempted
repairs to
the tank.
Unauthorized
modifications
to the
unloader valve, safety valve, or any
other components
which control tank
pressure.
Excessive vibration can weaken the
air tank and cause rupture or
explosion
ATTACHMENTS
& ACCESSORIES:
Exceeding
the pressure
rating of air
tools, spray guns, air operated
accessories,
tires, and other inflatables
can cause them to explode
or fly apart,
and could result in serious injury.
Never drill into, weld, or make any
modifications
to the tank or its
attachments.
The tank is designed to withstand
specific
operating pressures. Never make
adjustments
or parts substitutions
to
alter the factory
set operating
pressures.
For essential control of air pressure, you
must install a pressure regulator and
pressure gauge to the air outlet
(if not
equipped)
of your compressor.
Follow the
equipment manufacturers
recommendation
and never exceed the maximum allowable
pressure rating of attachments.
Never use
compressor
to inflate small low
pressure objects
such as children's
toys,
footballs,
basketballs,
etc.
I-"7-'IrJ-'1 ,ND]
WARNING: Risk from Flying Objects
What Could Happen
How To Prevent It
The compressed
air stream can cause
soft tissue damage
to exposed
skin and
can propel dirt, chips, loose
particles,
and small objects at high speed,
resulting in property damage or personal
injury.
Always wear ANSI Z87.1 approved
safety glasses with side shields when
using the compressor.
Never point any nozzle or sprayer
toward
any part of the body or at other
people or animals.
Always turn the compressor
off and
bleed pressure from the air hose and tank
before attempting
maintenance,
attaching
tools or accessories.
5-ENG
A16751