BEFORE INSTALLATION
PLEASE READ THESE INSTRUCTIONS THOROUGHLY AND COMPLETELY PRIOR TO
INSTALLATION & USE. FAILURE TO FOLLOW INSTRUCTIONS COULD CAUSE PROPERTY
DAMAGE, SERIOUS PERSONAL INJURY, OR DEATH.
By installing this product, you acknowledge the terms of the manufacturer's warranty. Once the
heater is installed, do not return product to the place of purchase. If you have any questions
regarding the warranty or product return policies, please contact:
BRAND
Rheem
®
or Richmond
®
Inspect all components.
The contents of your box should include one of the following units:
3.5 kW or 6.5 kW
REQUIRED TOOL LIST:
Electric drill for
pre-drilling holes
Phillips and Flat head
screwdrivers
Tape measure/ruler
1/2" dielectric unions - 3.5 kW
1/2" dielectric unions - 6.5 kW
1/2" shut off valves - 3.5 kW
1/2" shut off valves - 6.5 kW
Adjustable wrench
Pipe cutter
(may be beneficial)
Pencil
Level
CALL
800-374-8806
Installation
Template
PRODUCT SPECIFICATIONS:
ELECTRICAL
Power (kW)
Voltage (V)
Total Current (Amps)
Required Wire Size
(CU) 75ºC (AWG)
Required minimum breaker size
(per NEC-Intermittent Duty)
TEMPERATURE
Temperature Adjustment Range (F)
PLUMBING
Turn-On Flow Rate (GPM)
Inlet & Outlet Fittings
PRODUCT INFORMATION
Product Height (in)
Product Width (in)
Product Depth (in)
Product weight (lb)
5
EMAIL
eco.support@eemax.com
Manual
Warranty Card
(inside manual)
3.5 kW
6.5 kW
3.5 kW
6.5 kW
120V
240V
29
27
10
10
1x30
Double pole
60-140
60-140
0.25
0.25
1/2" NPT
1/2" NPT
6
6
11
11
3
3
4
4