Publicidad
Idiomas disponibles
Idiomas disponibles
Section 1: Safety Rules
WARNING
DO NOT touch hot surfaces.
, Stay dear of exhaust gases.
Allow equipment
to cool before touching.
[
WARNING
DO NOT wear loose clothing, jewelry
or anything that may
be caught in the starter or other rotating
parts.
Tie up long hair and remove ieweJDs
WARNING
Always wear eye protection
when using this equipment
or in
vicinity
of where
equipment
is in use.
WARNING
WHEN
ADJUSTING
OR MAKING
REPAiRSTOYOUR
PRESSURE
WASHER
Disconnect spark plug wire from spark plug and place wire
where it cannot contact spark plug.
CAUTION
DO NOT tamper with governed
speed.
DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position.
DO NOT leave spray, gun unattended
while machine is
running.
NEVER
use a spraygun which does not have a trigger lock or
trigger guard in place and in working
orden
Always be certain spray gun, nozzles and accessories are
correctly
attached.
DO NOT point spray gun at glass when in jet spray mode.
NEVER aim spray gun at plants_
If you have questions about intended use, ask dealer or
contact
Briggs & Stratton
Power Products.
NEVER operate
units with broken
or missing parts, or
without
protective
housing
or covers.
DO NOT
by-pass
an>, safety
device
on this machine.
Before starting
pressure washer in cold weather, check all
parts of the equipment
to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided
on unit.
Check fuel system for leaks or signs of deterioration,
such as
chafed or spongy hose, loose or missing damps, or damaged
tank or cap. Correct
all defects
before
operating
pressure
washe_%
This equipment
is designed
to be used with Briggs & Stratton
Power
Products
authorized
parts
ONLY.
ff equipment
is used
with parts
that
DO NOT
comply
with minimum
specifications,
user assumes
all risks and liabilities.
Publicidad
