Publicidad
Idiomas disponibles
Idiomas disponibles
#2 Phillips Screwdriver
ASSEMBLY
IMPORTANT:
Read entire owner's manual before you
attempt to assemble or operate your new pressure washer,
Remove
Pressure
Washer
From
I.
Remove parts bag packed with pressure washer.
2.
Slice two corners at end of carton from top to bottom
so pane[ can be folded down flaL then remove ai[
packing material
3,
Roi[ pressure washer out of carton,
Carton
Contents
Items
in the carton
include:
Main Unit
Safety Goggles
Handle
Plastic Accessory Tray
High Pressure Hose
Spray Gun
Utility
Brush and Adapter
Turbo Nozzle with Quid< Connect
Fitting
Nozzle Extension with Quid< Connect Fitting and Spray
Tip Holder
" Oil Bottle
" Parts Bag (which includes the following):
Owner's
Manual
Engine Manual
Owner's
Registration Card
Bag containing 4 muirJ-colored
Quick Connect Spray
Tips
Handle Fastening Hardware Kit (which includes):
Carriage Bok
"U' Bolt
Plastic Knobs (2)
"J" Hook
Chemical Hose Clip
Self Tapping Screws (4)
PREPARING
PRESSURE
WASHER
FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer heipiine at i =888=6 [ i =6708o
To prepare
your
pressure
washer
for operation,
you
will
need to perform
these
tasks:
I.
Fill out and send in registration
card.
2.
Attach accessory tray to handle, then attach handle to
main unit.
3.
Add oil to engine crankcase.
4,
Add fuel to fuel tank,
S.
Connect high pressure hose to spray gun and pump,
6,
Connect water supply to pump,
7,
Attach nozzle extension
to spray gun,
8,
Select/attach
quick connect spray tip to nozzle
extension,
Attach Handle
and Accessory
Tray
NOTE:
All assembly operations
given in this section will be
described from the perspective of assembling the pressure
washer from the rear,
i.
Slide plastic accessory tray onto handle and align holes
in accessory tray with holes on handle (Figure I).
O
Publicidad
