Publicidad
Idiomas disponibles
Idiomas disponibles
Disassembling
the Food Processor
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
1. Pressthe OFF button.
2. Unplug the Food Processor before
disassembling.
3. Turn the work bowl cover to the left
and remove.
6. Turn the work bowl to the left to
unlock it from the base. Lift
to remove.
4,
5,
If using the disc, remove it before
removing the bowl. Place two
fingers under each side of the disc,
and lift the disc and stem out of the
work bowl.
If using the mini bowl, grasp and
remove the bowl using the finger
grips located inside the bowl.
7,
The multipurpose blade can be
removed from the work bowl before
the contents are emptied. The blade
can also be held in place as you
remove food: Grasp the work bowl
from the bottom and place one finger
through the center opening to grip
the blade shaft. Then remove food
from the bowl and blade with
a spatula.
12
Publicidad
