Publicidad
フォーカスレンジ （AF/MF駆動範
囲） を切り替える
AF/MFの駆動範囲を切り替えて、 ピント合わせの時間
を短縮できます。撮影距離が一定の範囲内に限られて
いる場合に便利です。
フォーカスレンジ切り替えスイッチで、 撮影距
離範囲を選択する。
• FULL : 距離制限はありません。全域でピント合わせが
可能です。
• ∞-3m : 無限遠から3.0mの範囲でピント合わせが可能
です。
主な仕様
FE 70-300mm
商品名
F4.5-5.6 G OSS
（型名）
(SEL70300G)
焦点距離 （mm）
70-300
1
焦点距離イメージ*
（mm） 105-450
レンズ群一枚
13-16
2
画角1*
34°-8°10'
画角2*
2
23°-5°20'
最短撮影距離*
（m）
3
0.9
最大撮影倍率 （倍）
0.31
最小絞り
F22-F29
フィルター径 （mm）
72
外形寸法 （最大径×長さ）
84 × 143.5
（約：mm）
質量 （約：g）
854
手ブレ補正機能
あり
*
1
撮像素子がAPS-Cサイズ相当のレンズ交換式デジタル
カメラ装着時の35mm判換算値を表します。
*
2
画角1は35mm判カメラ、 画角2はAPS-Cサイズ相当の撮
像素子を搭載したレンズ交換式デジタルカメラでの値
を表します。
*
3
最短撮影距離とは、 撮像素子面から被写体までの距離を
表します。
• レンズの機構によっては、 撮影距離の変化に伴って焦点
距離が変化する場合があります。記載の焦点距離は撮影
距離が無限遠での定義です。
同梱物 （ （ ） 内の数字は個数）
レンズ （1） 、 レンズフロントキャップ （1） 、
レンズリヤキャップ （1） 、 レンズフード （1） 、
レンズケース （1） 、 印刷物一式
仕様および外観は、 改良のため予告なく変更すること
がありますが、 ご了承ください。
および
はソニー株式会社の商標です。
This instruction manual explains how to use
lenses. Precautions common to all lenses such
as notes on use are found in the separate
"Precautions before using". Be sure to read both
documents before using your lens.
This lens is designed for Sony α camera system
E-mount cameras. You cannot use it on A-mount
cameras.
The FE 70-300mm F4.5-5.6 G OSS is compatible with
the range of a 35mm format image sensor.
A camera equipped with a 35mm format image
sensor can be set to shoot at APS-C size.
For details on how to set your camera, refer to its
instruction manual.
For further information on compatibility, visit the
web site of Sony in your area, or consult your dealer
of Sony or local authorized service facility of Sony.
Notes on Use
When carrying a camera with the lens attached,
always firmly hold both the camera and the lens.
Do not hold by the part of the lens that protrudes
when zooming.
This lens is not water-proof, although designed with
dust-proofness and splash-proofness in mind. If using
in the rain etc., keep water drops away from the lens.
Precautions on using a flash
When using a flash, always remove the lens hood and
shoot at least 1 m (3.3 feet) away from your subject.
With certain combinations of lens and flash, the lens
may partially block the light of the flash, resulting in a
shadow at the bottom of the picture.
Vignetting
When using the lens, the corners of the screen
become darker than the center. To reduce this
phenomena (called vignetting), close the aperture by
1 to 2 stops.
Identifying the Parts
1 Lens hood index
2 Zooming ring
3 Focal-length scale
4 Zoom lock switch
5 Focal-length index
6 Focusing ring
7 Lens contacts*
8 Focus-hold button
9 Focus-mode switch
10 Focus-range limiter
11 Mounting index
12 Shake compensation switch
* Do not touch the lens contacts.
Attaching and Detaching the
Lens
To attach the lens
(See illustration
–
.)
1
Remove the rear and front lens caps and
the camera body cap.
You can attach/detach the front lens cap in two
ways, (1) and (2). When you attach/detach the
lens cap with the lens hood attached, use method
(2).
2
Align the white index on the lens barrel
with the white index on the camera
(mounting index), then insert the lens
into the camera mount and rotate it
clockwise until it locks.
Do not press the lens release button on the
camera when mounting the lens.
Do not mount the lens at an angle.
To remove the lens
(See illustration
–
.)
While holding down the lens release
button on the camera, rotate the lens
counterclockwise until it stops, then detach
the lens.
Attaching the Lens Hood
It is recommended that you use a lens hood to
reduce flare and ensure maximum image quality.
Align the red line on the lens hood with the
red line on the lens (lens hood index), then
insert the lens hood into the lens mount and
rotate it clockwise until it clicks into place
and the red dot on the lens hood is aligned
with the red line on the lens.
When using a built-in camera flash or an external
flash attached to the camera, remove the lens hood to
avoid blocking the flash light.
When storing, fit the lens hood onto the lens
backwards.
Zooming
Rotate the zooming ring to the desired focal
length.
Zoom lock switch
This prevents the lens barrel from extending due to
the weight of the lens while it is being carried.
Before setting the zoom lock switch, fully return the
lens to W (wide).
Slide the zoom lock switch in the
direction to lock
the zoom. To unlock the zoom, slide the zoom lock
switch back.
Focusing
The focus-mode switch of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
To switch AF (auto focus)/
MF (manual focus)
The focus mode can be switched between AF and
MF on the lens.
For AF photography, both the camera and lens
should be set to AF. For MF photography, either or
both the camera or lens should be set to MF.
To set the focus mode on the lens
Slide the focus-mode switch to the
appropriate mode, AF or MF (1).
Refer to the camera manuals to set the focus mode of
the camera.
In MF, turn the focusing ring to adjust the focus (2)
while looking through the viewfinder, etc.
To use a camera equipped with an AF/MF
control button
Press the AF/MF control button to switch AF to MF
when both the camera and lens are set to AF.
Press the AF/MF control button to switch MF to AF
when the camera is set to MF and the lens is set to AF.
Using the Shake Compensation
Function
Shake compensation switch
ON: Compensate for camera shake.
OFF: Does not compensate for camera shake. We
recommend using a tripod during shooting.
Using Focus-Hold Button
The focus-hold button of this lens does not function
with some camera models.
For further information on compatibility, visit the web
site of Sony in your area, or consult your dealer of
Sony or local authorized service facility of Sony.
Press the focus-hold button in AF to cancel AF.
The focus is fixed and you can release the shutter
on the fixed focus. Release the focus-hold button
while pressing the shutter button halfway to start
AF again.
Switching Focus Range
(AF/MF range)
The focus-range limiter enables you to reduce the
AF/MF time. This is useful when the subject distance
is definite.
Slide the focus-range limiter to select the
focus range.
FULL:
You can adjust the focus from the minimum
focusing distance to infinity.
∞ - 3m: You can adjust the focus from 3 m (9.8 feet)
to infinity.
Specifications
FE 70-300mm
Product name
F4.5-5.6 G OSS
(Model name)
(SEL70300G)
Focal length (mm)
70-300
35mm equivalent focal
105-450
length*
1
(mm)
Lens groups-elements
13-16
Angle of view 1*
2
34°-8°10'
Angle of view 2*
2
23°-5°20'
3
Minimum focus*
(m (feet))
0.9 (2.96)
Maximum magnification (X)
0.31
Minimum aperture
f/22-f/29
Filter diameter (mm)
72
Dimensions (maximum
84 × 143.5
diameter × height)
(3 3/8 × 5 3/4)
(approx., mm (in.))
Mass (approx., g (oz))
854 (30.2)
Shake compensation
Yes
function
*
1
This is the equivalent focal length in 35mm format
when mounted on an Interchangeable Lens Digital
Camera equipped with an APS-C sized image sensor.
*
2
Angle of view 1 is the value for 35mm cameras, and
angle of view 2 is the value for Interchangeable Lens
Digital Cameras equipped with an APS-C sized image
sensor.
3
*
Minimum focus is the distance from the image
sensor to the subject.
Depending on the lens mechanism, the focal length
may change with any change in shooting distance.
The focal lengths given above assume the lens is
focused at infinity.
Included items
(The number in parentheses indicates the number
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1),
Lens hood (1), Lens case (1), Set of printed
documentation
Design and specifications are subject to change
without notice.
and
are trademarks of Sony Corporation.
Cette notice explique comment se servir des
objectifs. Les précautions communes à tous
les objectifs, par exemple les remarques sur
l'emploi, se trouvent sur la feuille « Précautions
avant toute utilisation ». Veuillez lire les deux
documents avant d'utiliser votre objectif.
Votre objectif est conçu pour les appareils photo à
monture E de type Sony α. Il ne peut pas être utilisé
pour les appareils photo à monture A.
Le FE 70-300mm F4.5-5.6 G OSS est compatible
avec la plage d'un capteur d'image de format
35 mm.
Un appareil photo équipé d'un capteur d'image de
format 35 mm peut être réglé pour la prise de vue
en APS-C.
Pour les détails sur la manière de régler l'appareil
photo, reportez-vous à son mode d'emploi.
Pour plus d'informations sur la compatibilité,
consultez le site de Sony de votre pays, ou
adressez-vous à un revendeur Sony ou à un service
après-vente agréé Sony.
Remarques sur l'emploi
Lorsque vous portez un appareil photo avec l'objectif
dessus, tenez toujours fermement l'appareil photo et
l'objectif.
Ne tenez pas l'appareil photo par la partie de l'objectif
qui ressort lors d'un zoom.
Cet objectif n'est pas étanche à l'eau bien qu'il
soit conçu pour résister à la poussière et aux
éclaboussures. Si vous l'utilisez sous la pluie, etc.
veillez à ce que de l'eau ne tombe pas dessus.
Précautions concernant l'emploi d'un flash
Lorsque vous utilisez un flash, retirez toujours le
parasoleil et prenez vos photos à au moins 1 m
(3,3 pieds) du sujet. Associé à certains types de flash,
l'objectif peut bloquer partiellement la lumière du
flash et produire un ombre au bas de l'image.
Vignetage
Lorsque l'objectif est utilisé, les coins de l'écran
deviennent plus sombres que le centre. Pour réduire
ce phénomène (appelé vignetage), fermez l'ouverture
de 1 ou 2 crans.
Identification des éléments
1 Repère de parasoleil
2 Bague du zoom
3 Echelle de la longueur focale
4 Bouton de blocage de zoom
5 Repère de la longueur focale
6 Bague de mise au point
7 Contacts d'objectif *
8 Bouton de maintien de la mise au point
9 Commutateur de mode de mise au point
10 Limiteur de plage de mise au point
11 Repère de montage
12 Commutateur Antibougé
* Ne touchez pas les contacts d'objectif.
(Suite à la page arrière)
Publicidad
