Kohler PureWash E580 K-32331-0 Guia Del Usuario página 4

Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an electrical outlet that is properly installed and grounded.
DANGER: Risk of electric shock. Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal.
The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if
in doubt whether the product is properly grounded.
This product is factory equipped with a specific electric cord and plug to permit connection to a proper electric circuit.
Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be
used with this product. Do not modify the plug provided — if it will not fit the outlet, have the proper outlet installed by
a qualified electrician. If the product must be reconnected for use on a different type of electric circuit, the connection
should be made by qualified service personnel.
CAUTION: Risk of property damage. If it is necessary to use an extension cord, a single cord may be used
provided that the "Type" begins with "SJ", the cord is a 12 gauge, grounded (12/3), is no longer than 25 feet (7.6
meters), and is plugged into a GFCI* electrical outlet. Promptly replace an extension cord that exhibits any sign of
damage.
*Outside North America, this may be known as a Residual Current Device (RCD).
1548727-5-A
4 Kohler Co.