(H) - Dryer: Press to activate the dryer feature. The dryer stops automatically after about 5 minutes.
(I) - Forward and (J) - Backward: Use these icons to move the spray wand position forward or backward during use.
(K) - Nozzle Clean: Press to start the nozzle and spray wand cleaning cycle. During the cycle, the nozzle will move back
and forth three times, and stop in the fully extended position. You can then manually clean the nozzle and spray wand.
See the "Clean the Spray Wand" section for detailed nozzle and spray wand cleaning instructions.
System Locks: Press and hold the "WATER/DRYER TEMP" icon for more than 3 seconds to lock the "WATER/DRYER
TEMP" feature from further use. To unlock, press and hold for more than 3 seconds again. Press and hold the "SEAT
TEMP" icon for more than 3 seconds to lock the "SEAT TEMP" feature from further use. To unlock, press and hold for
more than 3 seconds again.
Spray Wand Oscillation: When either the "REAR/OSCILLATE" or "FRONT/OSCILLATE" features are running, press
either icon a second time to start back and forth spray wand oscillation. Press either icon a third time to stop spray wand
oscillation.
Forced "ON/OFF": If the seat and toilet sizes are not compatible, the seat sensor may not detect when the seat is occupied.
Press and hold the spray wand "FORWARD" icon for more than 3 seconds to override the sensor. Then turn ON and OFF
the seat features without relying upon sensor activation.
1548727-5-A
6
Kohler Co.