ADE CK 2304 Instrucciones De Operación página 30

Set time and date
‚ If more than 15 seconds pass between
‚ The indication of the displayed values
With the batteries in place, all indications will appear
briefly on the display, and you will hear a beep. After
a short time, the display shows the measured room
temperature and indoor air humidity.
1. Hold the
display.
2. Use or
save the setting.
3. Proceed as described above:
− Press the button
− Press
4. Adjust the following settings:
− Month
− Day
− Hour
− Minute
5. Finally, press
30
two button presses, the setting process is
automatically terminated and you have to
repeat it.
changes faster by holding
button until the year digit flashes on the
to set the current year and press
each time to save the setting.
to end the setup process.
or to set the desired value.
CK 2304 bathroom clock
or .
to