Descargar Imprimir esta página

ADE CK 2304 Instrucciones De Operación página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
You can choose between the 12-hour or
24-hour time format. Follow the display
indication during setup ("PM" = afternoon
display in 12-hour format).
Using countdown
In the countdown mode, a time is counted down. You can
set a time period from 1 to 99 minutes.
The countdown is displayed in large digits in
the area where the time is normally displayed.
During the countdown, the time is displayed
in a miniature form to the right of the date
display.
Proceed as follows to set a countdown:
− Use
or
Press and hold the respective sensor field to increase
the time value.
Releasing
automatically after a few seconds.
You can early terminate the countdown by pressing
.
After the countdown has elapsed, the device will beep
for approx. 1 minute and the LED will be flashing.
After that, the display shows the time again in large
digits at the top.
To terminate the beeps, press
CK 2304 bathroom clock
to set the desired countdown time:
or
starts the countdown
.
31

Publicidad

loading