Present Ation; Dear Customer; Design And Features - Husqvarna K970 II Chain Manual De Instrucciones

Dear customer!

Thank y ou for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorised
dealers, ask him for the address of your nearest service
workshop.
This operator's manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (using, service, maintenance etc.) the life span
and the second-hand value of the machine can be
extended. If you ever lend or sell this machine, make sure
that the borrower or buyer gets the operator ' s manual, so
they will also know how to properly maintain and use it.
More than 300 y ears of innovation
Husqv arna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Charles
XI ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the o wner's/employer's responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator's Manual. They must be aware
of:
• The machine's safety instructions.
• The machine's range of applications and limitations.
• How the machine is to be used and maintained.
Local regulations could restict the use of this machine.
Find out what regulations are applicable where you work
before you start using the machine.
The man ufacturer's reservation
Subsequent to pub lishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner's obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
4 – English
PRESENT A TION
Design and f eatures
This diamond chain sa w is a hand held power cutter
designed to cut hard materials like concrete masonry and
stone and should not be used for any purpose not
described in this manual. Safe operation of this product
requires the operator to read this manual carefully. Ask
your dealer or Husqvarna should you need more
information.
Some of the unique features of your product are
described below.
Smar tCarb™
Built-in automatic fi lter compensation maintains high
power and reduces fuel consumption.
Dura Star ter™
Dust sealed star ter unit, where the return spring and the
pulley bearing are sealed which makes the starter
virtually maintenance free and even more reliable.
X-T orq®
The X-T orq® engine provides a more accessible torque
for a wider range of speeds which results in maximum
cutting capacity. X-Torq® reduces the fuel consumption
by up to 20% and the emissions by up to 60%.
EasyStar t
The engine and star ter are designed to ensure quick and
easy starting of the machine. Reduces the pull resistance
in the starter cord by up to 40%. (Reduces the
compression during starting.)
Air pur ge
When y ou push the air purge diaphragm, fuel is pumped
through to the carburettor. Fewer pulls are required for
starting, meaning the machine becomes easier to start.
Effi cient vibration damping system
Effi cient vibration dampers spare arms and hands.
Lar ge cutting depth
Giv es a cutting depth of 390 mm (15"). Cuts can be made
efficiently from a single direction. Small openings with
dimensions of 11x11 cm (4x4 ") can be cut which is
perfect for cutting openings with irregular shapes.
W ater cooling and dust management
The cutting equipment is pro vided with water cooling and
dust management system for wet cutting and dust
suppression.