Energeeks EG-AL007 Manual De Usuario página 23

Zone selection
- Independent zones
In this mode, each zone will have a different function, and a
different sound, allowing you to use the alarm and tone functions
at the same time.
- Zone 1 (normal zone): The sensors installed in zona uno
(normal zone), will notify you with the selected sound, you can
change the desired sound with the remote control at any time.
These sensors will work when the alarm is armed, but not when
it is disarmed.
- Zone 2 (zone tone): The sensors installed in this zone will work
in tone mode, regardless of the selected sound, and will always
work, regardless of whether the alarm is activated or not.
- Zone 3 (emergency zone): The sensors linked to this zone, go
off the alarm with the alarm sound, and will always work, the
alarm is activated or deactivated.
You can change from normal zone mode to independent zone mode
at any time, without the need to reinstall the sensors, by keeping the
"Configuration" and "Status" buttons pressed simultaneously for 3
seconds, a light flick of the left-hand led will confirm the change to
mode "independent zones" and a flashing of the 3 led will indicate the
change to "normal zones".
In this way, you can change to "Normal Zones" and use all your sensors
as an alarm, being able to activate or deactivate them, and return
when you want to "Independent Zones" whenever you want.
23