This can be achieved by screwing the
adjustable feet (32) up or down, as
shown in Fig.11.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (47),
as shown in Fig.12, which make it
easier to move. The two wheels at the
front of the unit make it easier to place
the unit in to any chosen position by
lifting the rear slightly.
Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION.-
Insert the jack (Z) for the transformer
into the connection hole (R) on the
main body (bottom, rear of the
machine)
transformer (96) into a 220 V mains
supply, Fig.13.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual).
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
17
and
then
plug
the