Publicidad
Idiomas disponibles
Idiomas disponibles
How to Stop
For controlled stops, apply the brakes by squeezing the brake lever (D) on handlebar. Razor recommends
that you practice applying the brakes at various speeds and in an open area free from obstructions
before riding your scooter around others.
When the brakes are applied the tail/brake light will glow brighter. The brake light is always functional
and independent of the other lights being activated.
Option 1 - Release the throttle (C) and apply the brakes, by squeezing the brake lever (D), until the unit
comes to a complete stop.
Option 2 - Release the throttle (C) and step on the rear-fender brake, the power will cut off and then
product will slow to a stop.
Put down kickstand.
C
D
Changing the Speed Mode
Press the power button quickly two (2) times to select the desired mode.
1
The Normal mode max speed
is up to 16 km/h (10 mph)
as shown at the top of the
display (1).
2
The Sport mode max speed
is up to 29 km/h (18 mph) as
shown at the top of the
display (2).
A
The C35 display default
setting is in miles.
If you would like to change
the display setting
to kilometers, press the
power button (A) three
times quickly to select the
kilometers setting
10
Warning: The brakes are
capable of skidding the rear tire
and throwing an unsuspecting
rider. Practice in an open area
free from obstacles until you
are familiar with the brake
function. Avoid skidding to a
stop as this can cause you to
lose control and/or damage the
rear tire.
Note: As an additional safety
feature, the scooter is designed
to cut power to the motor
when the brakes are applied.
Note: Motor will re-engage,
(without having to kick to
start), if brakes are released
and throttle is applied before
scooter has slowed down to
under 5 km/h (3 mph).
Note: Practice riding only in
wide open areas clear from
curbs, parking blocks and
other obstacles. Impacting
the wheels against any hard
surface can damage the wheels.
Publicidad
