Cleaning And Maintenance; Peg-Pérego After-Sales Service; Serial Numbers - Peg-Perego seggiolino pop-up Instrucciones De Uso

attached – arrow_a) into the leg divider until they click
into place (arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c) and pull
the waist straps out (arrow_d).
5 To tighten the waist strap, pull on both sides in the
direction of the arrow (arrow_a). To loosen it, move it
in the opposite direction.
6 To adjust the height of the safety harnesses, release
the two buckles on the rear of the backrest.
Pull the shoulder straps towards you (arrow_a) until the
buckles are released and insert them in the backrest
loops (arrow_b). Remove the shoulder straps from the
sack (arrow_c) and insert them in the most appropriate
loop (arrow_d), then re-attach the two buckles on the
rear of the backrest (arrow_e) The buckles are securely
attached when a click is heard (fig_f).
7 HOOD: slide the hood's attachments into the seat's
attachments (fig_a), button the top part of the hood
on both sides of the seat (fig_b), and finally fasten the
sides with the elastics (fig_c). To remove the hood: pull
out the attachments and unbutton.
8 The images referring to the textile details may
differ from the collection purchased.
- use the double zipper slider on the rear (fig_a).
- loosen the Velcro strap on the rear (fig_b)
9 When the backrest is fully reclined, the hood may be
opened simply by pulling it towards you (fig_a).
The hood also comes with a further insert that serves
as a parasol.
To open it, pull it forward (fig_b).
The hood includes a slot from which you can hang the
child's favourite toy (fig_c).
10 FOOT MUFF: The images referring to the textile
details may differ from the collection purchased.
Lift the leg rest, slide on the foot muff and button it
below (fig_a); then, slide the foot muff under the front
bar (fig_b). Unbutton the hood's inside button on both
sides (fig_c) and button up the foot muff (fig_d).
11 FASTENING THE SEAT TO THE CARRIAGE: Seggiolino
Pop-Up can be secured to the carriage either facing
mom or the street. Place it centrally on the carriage
alongside the symbols (fig_a) and press downwards
with both hands until it clicks into place (fig_b). To
ensure it is properly secured, grab the seat from the
front bar and pull upwards.
12 RELEASING THE SEAT FROM THE CARRIAGE: Press
the two buttons on the armrests of the seat (fig_a)
and then the two levers underneath (fig_b); pull up
the seat (fig_c) until it releases. If the backrest is fully
reclined forward (in the closed position, facing the
world), the seat cannot be released from the chassis
(fig_d). In this case, lift the backrest to the position of
use before releasing the seat from the chassis (fig_e).
13 CLOSING THE STROLLER: To close the stroller with the
seat facing the street, press the backrest adjustment
handle (fig_a) and lower the backrest fully forward
(fig_b). To open it, lift the backrest to the position
of use, until it locks into place (fig_c). To close the
stroller with the seat facing mom, fully recline the
backrest (fig_d).
14 REMOVING THE COVER: unbutton the cover along
the armrests (fig_a) and the backrest (fig_b), remove
the cover from the footrest (fig_c), unfasten the
side elastics (fig_d), unscrew (fig_e) and remove the
harness on both sides, and finally remove the crotch
strap from above, pushing from under the seat (fig_f).

SERIAL NUMBERS

15 Seggiolino Pop-Up reports information as at the date
of manufacture of the product.
_ Product name, date of manufacture and serial number
of the seat.
This information is required for any complaints.
THE ORIGINAL ACCESSORY PEG PEREGO
Peg Perego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE SEAT: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING FABRIC PARTS: Brush the fabric parts to
remove dust.
• When washing, closely follow the instructions stated
on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Pérego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
PEG-PÉREGO AFTER-SALES
SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
numbe r of the product.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PEG PEREGO S.p.A. and are
protected by the laws in force.
- 11 -