Installation
Instructions
30" Electric Cooktop
JP256
I[-_
"If gou have questions, call 800.GE.CARES or visit our website at: ge.com"
BEFORE YOU BEGIN
Read these instructions
completely
and carefully.
• IM PORTANT - Save t hese i nstructions
for local inspector's
use.
• IM PORTANT - Observe all
governing
codes and ordinances.
• Note to Installer
- Be sure to leave these
instructions
with the Consumer.
• Note to Consumer
- Keep these instructions
for
future reference.
• Product failure due to improper
installation
is not
covered under the Warranty.
AWARNING
- This appliance
must be
properlg grounded.
•ATTENTION INSTALLER --ALL
COOKTOPS
MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED
JUNCTION
BOX. A
"PLUG AND RECEPTACLE" ISNOT PERMITTED
ON THESE PRODUCTS.
• Proper installation isthe responsibility of the
installer and product failure due to improper
installation isNOT covered under warranty.
PARTS INCLUDED
Foam Tape
2 Hold-Down
Brackets
6 Hex-Head
Screws
(4 required,
2 extra)
2 Thumbscrews
I
MATERIALS YOU WILL NEED
Junction
Box
Wire Nuts
TOOLS YOU WILL NEED
t_l
={i::: 1_
Pencil
Phillips-Head
Screwdriver
1/4" Nut Driver
SaberSaw
1/8" Drill Bit & Electric
or Hand Drill
Ruler or Straightedge
Safetg Glasses
12