LG WM3477HW Guía Del Usuario E Instrucciones De Instalacion página 20

OW TO USE
OPERATING THE WASHER
once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
O Press the ON/OFF button to turn on the
washer. The lights around the
cycle selector knob will illuminate.
O Turn the cycle selector knob to the desired
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, and Option settings
for that cycle.
t_lf you would like to change the settings for
that cycle, press the appropriate cycle
modifier button(s) until the indicator light for
the desired setting is lit.
NOTE: To protect your garments, not every
wash temperature, spin speed, or option is
available with every cycle.
O
Press the START/PAUSE button
to begin the cycle. The door will
latch, the display will change,
and the washer will calculate the
estimated time remaining. Once the washer
has calculated the estimated total cycle time,
the washer will start. To pause the cycle at
any time, press PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the Drain & Spin cycle to
drain excess water. Do not try to force the
door open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle.
When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal
for small items.
2O