INSTA[/MION INST UcTIONS
FLOORING
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed
floor.
See the NOTE below.
Allowable slope under the entire washer is
1° maximum.
Carpeting and soft tile surfaces are not
recommended.
Never install the washer on a platform or weakly
supported structure. Use only an approved
accessory pedestal.
NOTE: If a drip pan must be used, take extra
care to follow the instructions
provided with the
drip pan and make sure the leveling feet are
adjusted for firm and even contact with the pan.
Use of drip pans and failure to properly level the
machine may result in increased vibration and
noise during operation.
9