LG WM2501H A Serie Guía Del Usuario E Instruciones Para Instalación página 24

OW TO USE
LOAD SiZE SENSING SYSTEM
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency.
f
'The LOAD SIZE display:
Example 1: If thewasher hasdetected a smallloadsize,the
display mayonlyshowonelightedbar.Onlya smallamount o f
detergent shouldbeused, b ecause theamount o fclothing and
thequantity ofwaterthat will beusedissmall.
Detergent
Rec0mmende manufacturer's
amountfor I _ -Jl recommended
thisload ----F-_ _1 amount fora
fullload
Example 2: If thewasher hasdetected a largeloadsize,the
display mayshowall fourbarslighted. M oredetergent should
beused,because t heamount o f clothing andthequantity of
waterthatwill be usedis greater.
H Detergent
Recommended manufacturer's
amount for-=--H_ 1/I recommended
this10ad I_ J-I amount fora
full10ad
NOTE: Because t he washer u sesa verysmallamount o f water,
careshould betakenwhendeciding howmuchdetergent
to use.Normal loadsonlyneedabouthalfthedetergent
manufacturer's recommended amount. Thissavesdetergent by
usingit in a moreconcentrated manner. However, for heavily
soiledloads, a dditional detergent shouldbeadded. N ever
exceed manufacturer
TO use Automatic Load Size Sensing:
_l Load the washer, select the desired cycle and
options, and then start the cycle by pressing the
START/PAUSE button.
O The washer will tumble for a short time to detect
the size of the load. After the washer detects
the load size, the washer will show the detected
size in the LOAD SIZE display for 10 seconds
before it continues with the cycle.
O During the 10 second in
delay step three, press
the START/PAUSE button to pause the cycle.
O Fili the detergent and additive compartments
of the detergent drawer with detergent/additive
amounts based on the load size the machine has
detected. Following these guidelines can save
detergent.
Press the START/PAUSE button again to resume
the cycle.
To check the load size during the wash portion of the
cycle, press and hold the RINSE+SPIN button for 3
seconds. The LOAD SIZE display will be activated for
10 seconds.
NOTE: The load detection routine only works with dry
clothes. Since the detection system is detecting the
WEIGHT of the load, it will be affected by unusually
heaw articles in the load. For example, a garment
that is already wet that is loaded with other items will
cause the LOAD SIZE reading to be inaccurate.
If you do not desire to take advantage of the load size
detection feature, simply load the desired amount of
detergent and additives in the dispenser and start the
washer in the usual manner.
24