LG WM2501H A Serie Guía Del Usuario E Instruciones Para Instalación página 26

OW TO USE
SPEciAL FUNcTiONS
The option buttons also activate special
functions, including LOAD SIZE, BEEPER
ON/OFF, CHILD LOCK, TUB CLEAN and
SPINSENSF m. Press and hold the option button
marked with the special function for 3 seconds to
activate.
LOAD SIZE
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency. See page 24 for
details.
CHILD LOCK
Use this option to prevent unwanted use of the
washer or to keep cycle settings from
being changed while the washer is
operating. Press and hold the PRE-
WASH button for 3 seconds to activate
or deactivate CHILD LOCK.
The lock icon will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle. Once CHILD LOCK is selected,
the display will alternate between CL and the time
remaining.
TUB CLEAN
A buildup of detergent residue can occur in the
wash tub over time and can lead to
a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to
remove this buildup. Press and hold the
EXTRA RINSE button for 3 seconds to activate this
cycle. After the cycle has ended, open the door
and allow the drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
SPINSENSE
TM
SPINSENSE
TM
can be used to help reduce or
eliminate vibrations, especially on wood
floor installations.
To activate SPINSENSETM:
While the washing machine is running in any
cycle, press and hold the STAIN CYCLE button
for 3 seconds.
The SPIN SPEED light will blink while
the washer is running to show that SPINSENSE
TM
is active. The SPINSENSF Mfunction will remain
active for every cycle, even after a power failure.
To cancel SPINSENSETm:
Press and hold the STAIN CYCLE button for 3
seconds to turn off the SPINSENSF Mfunction.
BEEPER ON/OFF
You may turn the end-of-cycle beeper on or off
with the WATER PLUS button.
Press and hold the WATER PLUS
button for 3 seconds to turn the beeper
OFR
Press and hold the WATER PLUS button again for
3 seconds to turn the beeper back on.
HAND WASH/WOOL
,0nly woolenitemsthat are designated as "Machine-Washable"
shouldbewashed in thiswashing machine
o Wash 0nlysmallloadsfor optimum fabriccare(less than8 Ibs.)
0nly neutral ( w001 s afe) detergents s houldbeused (Onlya small
quantityof detergent i s needed due to the small10ad sizeand
10w volume of waterin thecycle.)
TheHANDWASH/W00L cycleusesa gentletumbleactionand
10w speedspinfor ultimate fabriccare
The wool wash cycle of this machine has been
(_(e approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
"{7OOLMARK on the garment label and those issued by the
manufacturer of this washing machine, M0807
_S_ Certified by NSF
Certificado pot NSF
NSF International (formerly the National Sanitation Foundation),
certifies that SANITARY cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.
26