Descargar Imprimir esta página

Craftsman 919.167310 Manual Del Operador página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY and PREVENTING
EQUIPMENT
PROBLEMS.
To help you recognize this information, we use the symbols
below. Please read the manual and pay attention to these sections.
lndicates
an imminently
hazardous
situation
which, if not avoided,
will
result in death or serious in)ury.
Indicates a potentially
hazardous sit-
uation which,
if not avoided,
could
result in death or serious in)ury._.
Indicates
a potentially
hazardous
situation which, if not avoided, m_
result in minor or moderate
in)ur_
Used without the safety alert sym-
bol indicates a potentially haz-
ardous situation which, if not avoided, may result in
property d am a,cLe_.
O
SAVE THESE INSTRUCTIONS
_t
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY
AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUC-
TIONS BEFORE USING THIS EQUIPMENT.
RISK OF EXPLOSION
OR FIRE
WHAT CAN HAPPEN
IT IS NORMAL
FOR ELECTRICAL CONTACTS WITHIN
THE MOTOR AND PRESSURE SWITCH TO SPARK.
iF ELECTRICAL SPARKS FROM COMPRESSOR COME
INTO CONTACT WITH FLAMMABLE
VAPORS, THEY
MAY IGNITE, CAUSING
FIRE OR EXPLOSION.
RESTRICTING
ANY OF THE COMPRESSOR
VENTILA=
TION OPENINGS WILL CAUSE SERIOUS OVERHEATING
AND COULD CAUSE FIRE.
UNATTENDED
OPERATION OF THIS PRODUCT COULD
RESULT iN PERSONAL INJURY OR PROPERTY DAM-
AGE. TO REDUCE THE RISK OF FIRE, DO NOT ALLOW
THE COMPRESSOR
TO OPERATE UNATTENDED.
HOW TO PREVENT IT
ALWAYS OPERATE THE COMPRESSOR
iN A WELL VEN-
TILATED AREA FREE OF COMBUSTIBLE
MATERIALS,
GASOLINE OR SOLVENT VAPORS.
IF SPRAYING FLAMMABLE
MATERIALS, LOCATE COM-
PRESSOR AT LEAST 20 FEET AWAY FROM SPRAY
AREA.
AN ADDITIONAL LENGTH OF HOSE MAY BE
REQUIRED.
STORE FLAMMABLE
MATERIALS IN A SECURE LOCA-
TION AWAY FROM COMPRESSOR.
NEVER PLACE OBJECTS AGAINST OR ON TOP OF
COMPRESSOR.
OPERATE COMPRESSOR
IN AN OPEN
AREA AT LEAST 12 INCHES AWAY FROM ANY WALL
OR OBSTRUCTION
THAT WOULD RESTRICT THE FLOW
OF FRESH AIR TO THE VENTiLATiON OPENINGS.
OPERATE COMPRESSOR IN A CLEAN, DRY, WELL VENTI-
LATED AREA. DO NOT OPERATE UNIT INDOORS OR IN
ANY CONFINED AREA.
ALWAYS REMAIN iN ATTENDANCE
WITH THE PROD-
UCT WHEN IT IS OPERATING.
ALWAYS DISCONNECT
ELECTR(CAL POWER BY MOV=
ING PRESSURE SWITCH LEVER TO THE OFF POSiTiON
AND DRAIN TANK DAILY OR AFTER EACH USE.
3- ENG
D23358

Publicidad

loading