Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT INFORMATION WITH PLUG
Electrical connection
This appliance is equipped with a plug and may only be connected to a properly installed
–
earthed socket.
Only a qualified electrician who observes the relevant regulations may install the power plug or
–
replace the connection cable. If the plug is no longer accessible after installation, an all-pole
disconnector with a contact gap of at least 3 mm must be provided on the installation side.
Contact protection must be ensured by the installation.
–
Fuse protection: see the operating instructions for the technical data.
–
IMPORTANT INFORMATION WITH PLUG
The appliance is designed for permanent installation with a three-pole mains cable and may
–
only be connected by an authorised specialist in accordance with the wiring diagram.
Only a qualified electrician who observes the relevant regulations may replace the connection
–
cable.
Do not use multiple plugs, socket strips or extensions. There is a risk of fire in the event of
–
overload.
If the plug is no longer accessible after installation, an all-pole disconnector with a contact gap
–
of at least 3 mm must be provided.
Connect the wires of the power cable as per the following colour coding:
Green and yellow
Blue
Brown
Great Britain:
Do not connect the appliance to a 13 A plug and do not protect it with a 13 A fuse. The appliance
must be protected with a 16 A fuse or higher. The appliance must be disconnected from the power
supply during all installation work. Protection against accidental contact must be in place when
installing the appliance.
Earthing < (E)
Neutral conductor (N)
Live conductor (L)
15
Publicidad
