Descargar Imprimir esta página

DCU Tecnologic BOULEVARD Manual De Usuario página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENG
System, to find the MAC address and software version
of your Smartwatch.
Reset the device. After clicking Reset, all data on the
watch will be cleared.
Power off your Smartwatch.
Vibration adjustment (you can adjust the vibration size
of the watch: no vibration, weak, strong)
PRECAUTIONS:
1. Avoid subjecting the smartwatch to strong impacts, extreme
heat/cold and/or sun exposure.
2. Please do not disassemble, repair or modify the smartwatch
by yourself.
3. This device uses 5V 1A for charging. It is strictly prohibited to
use charging power supply higher than 5V, maximum
allowable 5V/2.4A.
4. The operating environment of this device is 0° ~ 45°. Do not
bring it close to extreme sources of heat.
5. When the smartwatch is wet, dry it with a soft cloth before
charging, otherwise it will corrode the charging contacts and
cause charging failure.
6. Do not bring the smartwatch near chemicals such as gasoline,
cleaning solvents, propanol, alcohol, insect repellent, or
perfume.
7. Please do not use this device in high voltage and high
magnetism environment
8. If you have sensitive skin or wear the smartwatch too tight,
you may feel uncomfortable.
9. Wipe beads of sweat from your wrist from time to time, as the
strap may be exposed to soap, sweat, allergens or pollutants
for a long time, which can cause itchy skin.
10. If you use it frequently, it is recommended to clean the
smartwatch every week. Clean with a damp cloth and remove
oil or dust with a mild soap. It is not recommended to use the
smartwatch with hot water. Water vapour could enter to the
sphere and damage the components.
21

Publicidad

loading

Este manual también es adecuado para:

3415707534157076