SEVERIN HV 7173 Instrucciones De Uso página 16

If the appliance is defective
∙ Have a defective appliance repaired by a specialist dealer or customer service (see
contact information in the appendix to this instruction manual or at
www.severin.de).
CE Marking
This device is compliant with the mandatory EU directives for CE marking.
1. Handpiece control panel
On/off button
Power mode H
Eco mode L
2. Button for bending the handpiece
3. Button for detaching the handset from the handpiece
4. Charging socket for the mains adapter on the handset
5. On/off switch on the handset
6. LED indication
7. Dust container release button
8. LED lights
9. Dust container with built-in filter
10. Long crevice tool
11. Short crevice tool
12. Brush attachment
13. Floor tool with brush roller
14. Charging socket for the mains adapter on the handpiece (back of the handpiece)
15. Assembled appliance
Not illustrated:
Mains adapter with mains plug and connection cable
Assembling the appliance
∙ Remove all packaging residues from the appliance.
∙ Fit the dust container if necessary (see chapter "Cleaning the dust container and filter"), insert the filter and replace the
filter cover.
Using as a handheld vacuum cleaner
∙ Attach the long or short crevice tool to the handset.
∙ You can also fit the brush attachment on the long crevice tool, e.g. to vacuum furniture.
Using as a floor vacuum cleaner
∙ Fit the handset into the handpiece until it clicks into place with the suction opening facing downwards.
∙ After use, press the
Tip: Press the button to bend the handpiece to easily reach recessed areas or fold up the unit for space-saving storage.
Charging the battery
Use the mains adapter to charge the battery before first use. It is recommended to charge the battery before each use,
especially if the appliance has not been used for a while. This extends battery life and ensures the longest possible cleaning
cycles.
16
Appliance parts and items included
Installing and charging the appliance
button to detach the handset.