LaserLiner HandyLaser Instrucciones De Uso página 6

Completely read through the operating
instructions, the „Warranty and
Additional Information" booklet as
well as the latest information under
!
the internet link at the end of these
instructions. Follow the instructions they
contain. This document must be kept
in a safe place and if the laser device
is passed on, this document must be
passed on with it.
Intended use
This laser spirit level is designed for aligning
horizontal surfaces and slopes The measuring
device has a point laser. The spring clips make
the measuring device particularly suitable for
laying tiles.
General safety instructions
– The device must only be used in accordance
with its intendedpurpose and within the scope
of the specifications.
– The measuring tools and accessories are not
toys. Keep out of reach of children.
– Modifications or changes to the device are not
permitted, this will otherwise invalidate the
approval and safety specifications.
– Do not expose the device to mechanical stress,
extreme temperatures, moisture or significant
vibration.
– The device must no longer be used if one or
more of its functions fail or the battery charge
is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or
reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
– Do not expose the device to mechanical stress,
extreme temperatures, moisture or significant
vibration.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017