Publicidad
Idiomas disponibles
Idiomas disponibles
COsensor Control Panel
MCO120 / MCO120DVB
5 Start-up of the installation
The mains voltage must reach the control panel through an external switch controlled. Once
powered, the control panel needs 1 minute and a half to enter the operating state. During this
time, the display will show first the software version number installed and then a countdown
timer.
6 Access level
6.1
Indicator lights and control buttons
The control panel has a front panel where the user can configure the requirements on which the
activation and deactivation of the ventilation and alarm outputs are carried out.
In this chapter, it is explained meaning of the light indications and command buttons on the front
panel of the control panels: MCO110, MCO120 y MCO120DVB
This front panel is common to all the control panels and is represented in Figure 9, where the
LEDs are marked with letters and the control buttons with numbers.
Figure 9: Front panel
The tables Table 4 and Table 5 describe the meaning of the LEDs and the use of the buttons on
the front panel, respectively.
FABRICANTE DE PRODUCTOS CONTRA INCENDIOS– FIRE PROTECTION MANUFACTURER
32
FABRICANTE DE PRODUTOS CONTRA INCÊNDIOS
C/ Compositor Wagner, 8 – P.I. Can Jardí - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - cofem@cofem.com -
www.cofem.com
Publicidad
