Descargar Imprimir esta página

Alpina LQ003 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
differences between your plug and your socket, let the plug be
substituted by a competent qualified electrician with a correct
one; also make sure that the cable is conforming to the power
consumption of the appliance. Do not use adaptors or extension
cables.
This appliance is to be used for domestic purposes only and
according to the way indicated in these instructions.
When the appliance is in use it becomes hot: only get in touch with
plastic handle and switches. Avoid touching the radiant part.
Do not touch the appliance with wet feet or hands.
Do not let the appliance outside, in the rain, in the sun, etc.
Never move the appliance by pulling the cord; never pull the cord
to unplug.
After switching on or off the appliance, it is possible to hear a light
noise (click) due to the heating or the cooling of the appliance. This
is normal and it does not indicate a bad working.
The reflector cannot be cleaned due to construction.
The heating element is not replaceable.
INSTALLING
Before each use, verify the appliance has no damages and
the cable neither. In case of doubt, call a competent qualified
electrician.
Put the appliance far enough from any heating sources,
inflammable materials (curtains, clothes, etc.), inflammable gas
or explosive materials and from materials that can get deformed
because of the high temperatures. Verify that the frontal part of the
appliance has a free space of about 1m, while the side has a free
space of 0.5m.
Stand the appliance on a horizontal, flat surface or table; do not
stand on a inclined plane (the appliance could capsize).
Make sure the cable is properly positioned and it is not in touch
with hot surfaces of the appliance. Do not wind the cord around the
appliance and do not bend it.

Publicidad

loading