Powersmart DB2603 Manual De Instrucciones página 79

TROUBLE SHOOTING
WARNING: Read instruction manual first! Remove battery pack from the tool before adjusting
or assembling accessories.
Problem
Unit will not start
Battery pack will not charge.
Unit shuts off abruptly
Possible Cause
Battery pack not installed
properly
Battery pack not charged.
Battery pack not inserted into
charger.
Charger not plugged in
Surrounding air temperature too
hot or too cold
Battery pack has reached its
maximum thermal limit.
Out of charge. (To maximize the
life of the battery pack, it is
designed to shutoff abruptly
when the charger is depleted
14
Possible Solution
Check battery pack installation.
Check battery pack charging
requirements.
Insert battery pack into charger
until LED appears
Plug charger into a working
outlet. Refer notes "for more
details.
Move charger and battery to a
surrounding air temperature of
above 32 degrees F(0° C) or
below 104 degrees F(+40° C)
Allow battery pack to cool down
Place on charger and allow to
charge