Zodiac Pool Systems Jandy TRUSENSE Manual Del Propietário página 12

ENGLISH
Page 12
b
a
Figure 3. Install Fittings and Sensors
10. Connect the Blue pH sensor BNC connector to the BLUE labeled left
side connector of the electronic circuit board. See Figure 4.
11. Connect the red ORP sensor BNC connector to the RED labeled right
side connector of the electronic circuit board. See Figure 4.
BLUE
Figure 4. Connect Sensor Wires
12. Install Jandy TruSense top cover.
Jandy TruSense Water Chemistry Analyzer | Owner's Manual
®
c
RED