Make A Ptt Call To Multiple Recipients; Callback Requests - Nokia 6267 Manual Del Usuario

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients
receive an incoming call and need to accept the call to participate. If supported
by your service provider, you may also select contacts with a phone number
but without a PTT number. For details, contact your service provider.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT key to start the call. The participating contacts
are shown on the display, as soon as they join the call.
3. Press and hold the PTT key to talk. Release the PTT key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Informations such as the
channel, the phone number, or the nickname (network service) of the caller
are displayed.
You can either accept or decline an incoming one-to-one call, if you have
set the phone to first notify you of the one-to-one calls.
When you press and hold the PTT key while the caller is talking, you hear
a tone, and Queuing is displayed. Press and hold the PTT key, and wait for
the other person to finish; then you can talk immediately.

Callback requests

■
If you make a one-to-one call and do not get a response, you can send
a request for the person to call you back.
78