Publicidad
Idiomas disponibles
Idiomas disponibles
USNG YOUR
WASHING
MACHINE 27
Saving
energy, ColdW_sh
_M
Adding
the ColdWash
TM
option
reduces
energy
usage and
provides
the same washing
performance
as a warm
water
wash
By using 6 different
washing
motion
(Tumbling,
Rolling,
Stepping,
Scrubbing,
Swing,
Filtration),
fabrics
get the cleaning
benefits,
without
the energy
usage
1
Press _(9_),_x
and turn _)_
to the desired
cycle.
2
Press _.
The washer
will automatically
adjust the cycle
settings
3
Set any other desired
options.
/ x
4
Press
NI.
,_x
,,-@NOTE
', • When you select the ColdWash
TM
option,
wash
time will
',
be increased
up to 10 minutes.
', • For high wash efficiency,
it Js recommended
to use less
than 8 pounds
Turn
on!off
melody
and
button
tones,
The washing
machine
plays a melody
when the wash
cycle
is finished.
The buttons
make a sound
each time
a button
is
pressed.
The melody
and button tones
can be turned
on and
off as desired.
Press and hold _for
3 seconds
during
the wash
cycle
- Once signal OFF is set, the signal beeps
once
(When
the-end-of-cycle
signal is disabled)
Press and hold _for
3 seconds
during
the wash
cycle
- Once signal ON is set, the beeper
beeps
once.
(When the CHILD
LOCK is activated.)
Press and hold _
for 3 seconds
during the wash
cycle.
@ NOTE
......
* Child Lock lasts after the end of cycle
If you want
to
deactivate
this function,
Press and hold the Pre-Wash
I
button
for 3 seconds.
/
Detecting
weight
of load, LOAD
SIZE
Loading the washing
machine
and pressing
the start
button
triggers
the machine
to detect
the weight
of the load, and
the load size icon _
on the display
panel for 10
displays
seconds. If the load size icon L_ isnot on, you can check
the weight of the load again d_ing the cycle This feature
willhelp you set the detergent amount
so as to wash clothes
efficiently b ased on the detected load size.
@ NOTE
If the washer
has detected
a small
load size, the display
may only show
one lighted
bar. Only a small amount
of detergent
should
be used, because
the amount
of
clothing
and the quantity
of water
that will be used is
small.
L-W
LOAO
SEE
The load detection
routine
only works
with dry clothes.
Since the detection
system
is detecting
the WEIGHT
of
the load, it will be affected
by unusually
heavy articles
in the load. For example,
a garment
that is already wet
that is loaded with other
items will cause the LOAD
SiZE
reading
to be inaccurate.
\ .................................................................................................................................................
Setting
options
during
cycle
You can add the desired
options
during the wash
cycle
Button
lock
feature,
Child
Lock
You can lock the washing
machine
to prevent
children
or
others
from changing
the cycle settings
by pressing
the
buttons
during
the cycle.
Press and hold _
for 3 seconds
during the wash
cycle
When
the CHILD LOCK is enabled,
m message
and the
-
aL_ -
remaining
wash time
are displayed,
in turn, on the display
panel of the washing
machine.
Publicidad
