Hiyasu KJR-01B Manual De Funcionamiento página 16

WIRE CONTROLLER AND THEIR FUNCTIONS
MODE BUTTON
Select the needing mode of the air conditioner.
FAN SPEED BUTTON
Push it to choose fan speed.
SWING BUTTON
Push the button when air swing is desired.
Push it again if your want to stop swinging.
TEMP. BUTTON
Push the or button to preset temperature.
The set temperature is increase to 30º C.
The set temperature is decrease to 17º C.
CLOCK ADJUSTMENT BUTTON
To adjust the time on the clock or the time of start operation and stop
operation.
RESET BUTTON
When you push the RESET button, all current settings are cancelled and get
into the condition of beginning. In the clock , the colon in "00:00" will flash,
the mode displays AUTO, fan speed displays AUTO, the temperature dis-
plays AUTO .
LOCK BUTTON
When you push the LOCK button, all current settings are locked in and the
wire controller does not accept any operation except that of the LOCK but-
ton. Use the lock mode when you want to prevent setting from being
changed accidentally or play fully. Push the LOCK button again when you
want to cancel the LOCK mode.
CANCEL BUTTON
Push this button to cancel ON time and OFF time.
ON/OFF BUTTON
To connecting the power to operate the wire controller. Push again to stop it.
ON/OFF LAMP
Indicate the Air Conditioner operating or not.
14