Publicidad
Idiomas disponibles
Idiomas disponibles
RESET AND LOCK BUTTON FUNCTION
(1)
Use a small stick to push the RESET button.
When you push the RESET button, all current settings are cancelled and get into the condition of beginning. In the clock, the
icon in "00:00"and " : " will flash, the mode displays "AUTO", fan speed displays "AUTO" and the temperature display "24h".
(2)
Use a small stick to push the LOCK button.
When you push the LOCK button, all current settings are locked in the remote controller does not accept any operation except
that of the LOCK button. Use the lock mode when you want to prevent settings from being changed accidentally or playfully.
Push the LOCK button again to cancel the LOCK mode.
This function is used to operate the unit temporarily in case the wire controller can not be used or testing the air conditioner.
When you choose the TEMPORARY mode, the air conditioner will operate as "COOL (HIGH)", the operation is not related to
the indoor temperature. The wire controller is disable in such condition, and the wire controller can be used after cancel the
TEMPORARY function.
INDICATING AND MEANINGS OF THE WIRE CONTROLLER
(1)
The meanings of the LCD indicator:
INDICATOR
ILLUMINING
GOING OFF
ILLUMINING
GOING OFF
(2)
The meanings of the mode lamp:
MODE
The lamp goes off, the fan on LCD also goes off
The lamp goes off, the fan on LCD illumines
The lamp goes off, the LCD also goes off
The mode lamp is flashing
The mode lamp is on
TEMPORARY OPERATION
MODE
FLASHING
The wire controller is transmitting signal to the air conditioner
The air conditioner is operated
The air conditioner is stop
The wire controller is in the mode of LOCK
The wire controller is in the mode of UNLOCK
MEANING OF INDICATOR
MEANING OF INDICATOR
The air conditioner is not operated
The air conditioner is in malfunction
The wire controller is not connected to the power
Waiting for signal or in malfunction
The air conditioner is operating
19
Publicidad
