Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Select a Proper Position
Mode 1 – Freestanding installation
Please install the dishwasher on a flat
•
and stable ground.
If the dishwasher is installed in a corner,
•
at least 50mm between the dishwasher
and the adjacent wall shall be reserved
to ensure that there is enough space for
the dishwasher to open and close, and
reinforce it with wooden strips.
CAUTION
•
Please place the dishwasher on a firm
and flat ground.
•
Do not install the dishwasher on an
elevated surface.
Mode 2 – Embedded installation
Please install the dishwasher on a flat
•
and stable ground.
Prepare notches on both sides for hoses
•
and cables (approx. 100 mm >< 75 mm).
The notch should be as close to the sink
•
as possible in order to facilitate the
connection of the water inlet pipe and
drain pipe.
In order to ensure smooth drainage, the
•
installation position of the dishwasher
shall not be more than 1m away from
the water tank.
Please
make
•
adjustments
dishwasher into the installation position.
CAUTION
•
The bare wood around this machine
shall be sealed with waterproof paint or
sealant to prevent it from expanding in
case of water.
•
Push the dishwasher into the cabinet of
open space and make sure that the
drain hose at the rear of the dishwasher
and in the cabinet are not knotted or
stretched.
•
Install the dishwasher in a flat place. Do
not place anything between the ground
and the machine foot.
80
necessary
height
before
pushing
the
Publicidad
