Publicidad
Idiomas disponibles
Idiomas disponibles
Filter Cleaning
1. Remove the lower dish rack and fix the
bottom spray arm.
2. Rotate the filter cup counterclockwise and
take out the filter assembly consisting of the
filter cup 1, metal filter screen 2 and micro
filter 3. After removing the filter assembly,
check and remove all foreign matter (if
necessary).
3. Clean each filter with running water and a
soft brush. Reassemble the filter assembly
before reinstallation.
4. Reinstall the filter assembly and fix them
clockwise by rotating the filter cup until it
clicks into place.
WARNING
•
Beware of sharp edges when cleaning metal
filters.
CAUTION
•
Remove food residues from the filter to
prevent odorous bacteria and possible
drainage problems.
Tips:
•
Please clean the filter after each load for the
best washing results. If food residues
remain in the filter, they may produce
peculiar smell.
•
Clean the filter with a soft brush at least
once a month.
•
Clean the filter with non-abrasive materials
and warm water.
•
Ensure that the filter is assembled properly
before starting the program. Rotate firmly
until there is a click sound during assembly.
Spray Arm Cleaning
If the spray arm hole is blocked by any food
residue, the tableware may not be cleaned well
due to improper water spray.
It is suggested that the spray arm be cleaned
every two weeks.
Lower spray arm cleaning
1. Ensure that spray holes are not blocked by
food particles.
2. Remove the food residue blocking the spray
arm hole with a pin or any sharp tool.
Middle spray arm cleaning
1. Pull the upper dish rack forward and ensure
that spray holes are not blocked by food
particles.
2. Before cleaning, rotate the nut at the
bottom of the spray arm counter clockwise
and pull it down to remove the middle spray
arm.
3. Remove food particles by flushing or
shaking the spray arm.
96
Publicidad
