Mad Catz T.E.3 ARCADE STICK Guia De Inicio Rapido página 5

02
PC INSTRUCTION
1. Take out the USB-A cable from the storage space.
2. Connect to PC (Windows) via the USB-A cable.
3. The arcade s�ck enters X-input mode upon connec�on.
4. If you wish to switch to D-input mode, hold the KEY LOCK for 2 seconds
un�l the LED 2 flash alternately for 30 seconds then return to show the
KEY LOCK status. To revert to X-input mode hold the KEY LOCK for 3 seconds.
CONSOLE INSTRUCTIONS
XBOX ONE Connec�on
1. Take out the USB-A cable from the storage space.
2. Connect to Xbox via USB-A cable, then press and hold "KEY LOCK"
bu�on for 2 seconds.
3. KEY LOCK light flashes 30 seconds, connect the XBOX ONE controller
to arcade s�ck USB port located on the back via micro-USB cable.
4. Press "HOME" key on the controller to complete the connec�on.
PS Connec�on
1. Take out the USB-A cable from the storage space.
2. Connect to PS4/PS5 via USB-A cable, then press and hold "KEY LOCK"
bu�on for 2 seconds, connec�on to PS5 via PS4 joys�ck only.
3. KEY LOCK light flashes 30 seconds, connect PS4 joys�ck to arcade s�ck
USB port located on the back via micro-USB cable.
4. Press "HOME/PS" key on the controller to complete the PS connec�on.
T.E.3 ENGLISH
EN