Maintenance And Care - Hazet-Werk 7000 sTAC Serie Instrucciones De Uso

1 . Maintenance
The internal mechanical and electronic functional elements do
not require any maintenance.
2 . Cleaning
• Only clean the torque wrench with
built-in angle gauge with a dry cloth.
• Do not expose the tool to liquids
and/or aggressive substances.
1 . Storage
Only store the torque wrench with built-in
angle gauge in its packaging.
• Prevent the wrench from falling.
• Keep tool in a dry and dust-free place.
• Do not store the tool outdoors.
• Protect the wrench from unauthorised access.
• Storage temperature: -10 °C up to +40 °C.
• Relative air humidity: max. 60%.
CAUTION! Remove the rechargeable battery if the
torque wrench with built-in angle gauge is not being
used for long periods of time. Battery leakage can
damage the tool. Reprogram the date and time every time the
device is reused. See 7.2.4 in Section 7, "Commissioning"
1 . Disposal
• For disposal, clean the torque wrench with built-in angle
gauge and disassemble it according to the regulations for
work safety and environmental protection.
• Components can be recycled. Dispose of electronic com-
ponents and batteries in accordance with legal regulations
and environmental directives (e.g. at scrap material collec-
tion points or recycling centres). Scrap any residual metal.
• Electronic waste, electronic components,
lubricants and other auxiliary materials must
be treated as hazardous waste and may only
be disposed of by authorised specialists!
• Reducing environmental pollution and preserving the
environment are at the heart of our activities!


Maintenance and care

3 . Spare parts
• Any service or repair work must be carried out by qualified
• Only the manufacturer's original spare parts may be used.
• Unsuitable or defective spare parts may cause damage,
• The use of unapproved spare parts will void all warranty,
• Rechargeable batteries must be replaced as required, in a

Storage
2 . Transport
• Only transport the torque wrench with built-in angle gauge

Disposal
2 . Hotline / contact:
This product has been developed and tested in accordance
with our high quality standards. Should you have any questions,
comments, suggestions for improvement or change requests, we
would like to express our thanks to all HAZET customers for your
feedback and will be glad to address your issues.
Your contacts for warranty, repair, adjustment and calibration
are your local HAZET partner and the HAZET International Sales
department: service-center@hazet.de
personnel only. To arrange this, please get in touch with
your HAZET partner.
malfunction or total failure of the tool.
service and liability claims as well as all claims for compen-
sation against the manufacturer or its agents, distributors
and sales representatives.
timely fashion. Only use the specified models of recharge-
able batteries. Note the direction of insertion.
in its case and ensure that it does not fall during transpor-
tation. Avoid any mechanical shock effects such as hard
impacts or falls. Failure to do so may result in damage to
the electronic components of the torque wrench with built-
in angle gauge.
33