Maintenance And Cleaning - Hazet-Werk 4902/6 Manual De Instrucciones

3. Maintenance and Cleaning

• Always keep the Inside Spring Vice clean. Do not
use degreasing agents or water because they
produce corrosion.
• For all questions and spare part orderings,
please include the article number of the Inside
Spring Vice.
• The threaded part of the spindle of the Inside
Spring Vice 4902-1 has to be greased.
We recommend:
Worked penetration 265/295 KP2R/DIN 51502
and DIN 51825.
• Checking and repair has to be carried out
exclusively by the manufacturer.
1
Spindle
6
Tubular Double Box-End Wrench
Ä 24
Design and Function
3
4
Upper Tensioning Jaw,
open
Bottom Tensioning Jaw,
4. Application
Installing and removing of the coil springs
at the rear axle of the following vehicles:
• Tensioning Jaws: 4902-10 upper
–
BMW 1-series: E87: 116i, 118 d, 120i, 120d;
E87: 118i since 2004
– BMW 3-series: E90: 320i, 320d, 325i, 330i
limousine since 2004; E91: 320, 325, 330
Touring since 2005
• The patented pendulum 6-point head with inte-
grated anti-twist protection provides a uniform
distribution of power.
• The patented internal guidance of the tensio-
ning jaws prevents the spring from sliding out.
• The spindle can be counter held at the
pendulum 6-point head.
• Select tensioning jaws to fit the spring.
5
Tubular Double Box-End Wrench
closed
Reversible Ratchet
4902-11 bottom
7
Ä 10
8
13