Publicidad
Idiomas disponibles
Idiomas disponibles
Lowering Stand to its Lowest Position
(Fig. 14)
Begin with the stand in the locked upright position.
Firmly grip the Handle 4 with both hands and place
one foot against the Kick Bar 5. Pull back on the
Handle 4 and lower the stand to the ground.
Check Fasteners
Periodically check that all fasteners are attached
and adjusted according to the assembly instruc-
tions included in this manual.
Service
NO
PARTS. We recom mend that all
tool service be performed by a Bosch Factory Ser-
vice Center or Authorized Bosch Service Station.
1609B08221_GTA50W_Table_Saw_Stand_OSI_20230426.indd 11
1609B08221_GTA50W_Table_Saw_Stand_OSI_20230426.indd 11
Operating Instructions
Maintenance
USER
SERVICE ABLE
Fig. 14
Tool Lubrication
Your Bosch tool has been properly lubricated and
is ready for use.
-11-
4/26/2023 11:32:16 AM
4/26/2023 11:32:16 AM
Publicidad
