Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3. Adjust tightness of running belt
All treadmills shall be adjusted for tightness before delivery and
after installation. However, the running belt may be loosened after a
period of use. For example,the treadmill has problems with stopping
and slipping during exercise. Adjust bolts of running belt with the
left and right synchronous as per clockwise direction to half a circle
as the unit when this phenomenon occurs. The feet will slip if the
running belt is too loose. But it is not good to be too tight. It is easy
to increase the load of the motor and damage the motor, running
belt and roller etc.
4. Running belt deviation adjustment
All treadmills need to adjust the running belt before delivery and
after installation. But the running belt may be deviated after a
period of use which may be caused by the following reasons:
① The main body is not placed smoothly.
② The feet of users are not in the center of the running belt.
③ Uneven force on the user's feet.
It will be returned to normal after a few minutes of no-load
rotation if deviation is caused by man-made. It should be
adjusted with 6mm wrench at a half circle as the unit for
deviation of non-recover automatically.
Please adjust left bolt with
clockwise or right bolt with
counterclockwise if running
belt deviates to the left.
26
Please adjust right bolt with
clockwise or left bolt with
counterclockwise if running
belt deviates to the right.
The running belt deviation is mainly maintained by the user according
to the manual. Running belt deviation will seriously damage the
running belt.This point must be found in time and corrected at once.
5. Adjustment of motor belt
All treadmills have been adjusted for the motor belt before and
after installation, but they may still be out after a period of use.
For the phenomenon of loose, slip, mainly need the user to
adjust by yourself.
Adjustment steps:
①Adjust the parallelism of the motor with a wrench. Turn the
bolt half a turn counter clockwise.
②Turn the belt tightening bolts clockwise half a circle.
NOTE: clean belt and pulley grooves regularly.
Belt tension bolt
Motor
Motor belt
Front roller
EN
Motor balance
adjustment bolt
27
Publicidad
