Emergency Stop Bar; Operation; Operating The Machine - Intimus 16.50 SmartShred Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
"Automatic mode" main screen (fig . 7)
The "Automatic mode" screen appears when:
the main switch is switched on and
the key selector switch is turned to the right.
1
2
3
4
5
1
Illuminated display "Forward"
2
Illuminated display "Backward"
3
Illuminated display "Catch basket full"
4
Illuminated display "Oil cutting mechanism" — optional
5
Illuminated display "Conveyor belt running" — optional
6
Illuminated display "Extraction system running" — opti-
onal
7
Total operating hours, operating hours since last service
and number of blockages
fig. 7 "Automatic mode" screen
"Manual operation" main screen (fig . 8)
The „Manual operation" screen appears when:
the main switch is switched on and
the key selector switch is turned to the left.
1
Button "Cutting mechanism: forward operation"
2
Button "Cutting mechanism: backward operation"
fig. 8 „Manual operation" screen
The machine and conveyor belt will continue running
for as long as the button is pressed.
94709 1 02/18
6
7
000122
1
2
000123

4 .3 Emergency stop bar

(fig . 3/1)
Should it be necessary, for any reason, to switch off
or stop the machine as quickly as possible, this can
be achieved by pressing the emergency stop bar. To
switch on again, release the bar (pull it out) and opera-
te the green „Start button" (fig. 4/3).
5

Operation

5 .1 Operating the machine

To switch on, proceed as follows:
1 . Set the main switch (fig. 4/2) to position "1".
2 . Insert the enclosed key into the key selector switch
(fig. 4/1) and turn it to the right.
¾ The display prompts you to close the safety cir-
cuit.
3 . Press the "Reset" button.
¾ The machine is now ready for operation.
Attention: The machine will only operate when
the emergency-stop rail (fig. 3) has been released
(pull out the red rail on the feed table),
the locking switch (fig. 4/1) has been released,
the main switch (fig. 4/2) has been switched on
(position „1"), and
the shredder bin (fig. 9) is fully docked.
1
2
3
1
Emergency-stop rail
2
Bracket
3
Shredder bin
fig. 9 Shredder with catch basket
16.50 SmartShred
000213
15

Publicidad

Tabla de contenido
loading

Tabla de contenido