Kingfisher Erbauer 672XH Manual De Instrucciones página 51

3.3. Press button to change the reference to the top.
Single distance measuring
NOTE:
• Target surfaces: Measuring errors can occur when measuring to
colourless liquids, glass, foam or semi-permeable surfaces or when
aiming at high gloss surfaces. Against dark surfaces the measuring
time increases.
• Every time the device is turned on it will default to the single
measurement function.
Minimum - maximum measuring
1
1. Press and hold the measuring button
2. Aim the laser at the target. Note in continuous measuring mode the
laser continually beeps when sound is on.
3. The screen displays the 'Min' and 'Max' measurements recorded.
4. Press the measuring button again
340337975_MNL_IN_V02.indb 50 340337975_MNL_IN_V02.indb 50
1
2
3 Sec
min
2
3
max
.
to stop measuring.
50
3
9.999 M
4
max 9.99M
min 8.99M
09-06-2022 12:40 09-06-2022 12:40