Setting The Day And Time; Blocking The Control Panel; Temperature Selection; Manual / Automatic Function - Rointe Z Serie Manual De Instrucciones

1.3. Setting the day and time

By pressing the button
adjust the time and date of our radiator.
Pressing the button
number of times it is pressed. With the buttons
To leave the time and date adjust feature, wait 30 seconds or press

1.4. Blocking the control panel

By pressing the keys
the control panel symbol is activated, and the keys will not respond when pressed.
The following symbol will appear on the screen if any button is pushed:
To unblock, press again the keys

1.5. Temperature selection

By pressing or
When the room temperature is lower than the one set, the radiator comes on, the
appearing.
1.6. Manual / Automatic functions
By pressing we change between the Manual and Automatic functions.
When the Manual function is selected, the symbol
Automatic function is selected, the symbol
1.6.1. Manual function
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.5.
1.6.2. Automatic function
This mode activates the programming set on the radiator.
20
for 3 seconds, we can access the time and date adjust feature to
, flashes up the hours, minutes and days of the week according to the
and , at the same time for 3 seconds, we block the control panel,
and
we change the temperature.
ICON MODE
COMFORT
ECO
ANTI-FROST
and we can alter the current settings.
, at the same time for 3 seconds.
appears on the display. When the
appears on the display.
TEMPERATURE RANGE
20ºC – 30ºC
15ºC – 19,5ºC
8ºC
after the date select.
symbol