Setting The Day And Time; Locking The Control Panel; Selection Of Temperature; Manual/Automatic Mode - Rointe T Serie Manual De Instrucciones

The screen will automatically go into sleep mode if no button is pushed for 10 seconds. By
pushing the button again the towel rail will go into standby mode with the word "Standby"
appearing followed by the Rointe logo.

1.3. Setting the day and time

By pressing the button
adjust the time and date of our towel rail.
Pressing the button
number of times it is pressed. With the buttons
To leave the time and date adjust feature, wait 30 seconds or press

1.4. Locking the Control Panel

By pressing the keys
the control panel symbol
key is pressed this image will appear in the screen of the towel rail:
To unlock, repeat the same procedure pressing the keys
seconds.

1.5. Selection of Temperature

By pressing or
one set, heated the towel rail goes on, the

1.6. Manual/Automatic Mode

By pressing we change between the Manual and Automatic mode. When the manual mode
is selected, the symbol
the symbol appears on the display.
1.6.1. Manual Mode
This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.4.
1.6.2. Automatic mode
This mode activates the programming set on the heated towel rail.

1.7. Two-hour Boost Mode (2h)

By pressing the key
for 3 seconds, we can access the time and date adjust feature to
, flashes up the hours, minutes and days of the week according to the
and at the same time for 3 seconds, we lock the control panel,
is activated, and the keys will not respond when pressed. If one
we set the temperature. When the room temperature is lower than the
appears on the display. When the automatic mode is selected,
SYMBOL MODE
COMFORT
ECO
ANTI-FROST
, the heated towel rail will work for two hours at maximum power,
and we can alter the current settings.
and
symbol appearing.
TEMPERATURE RANGE
20ºC TO 30ºC
15ºC TO 19.5ºC
8ºC
after the date select.
at the same time for 3
7